Author Topic: blodgett 1060 pilot adjustment  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline nicks pizza

  • Registered User
  • Posts: 2
blodgett 1060 pilot adjustment
« on: June 09, 2010, 11:04:41 PM »
Is there a way to turn up the amount of gas going to the pilot?for some reason it keeps going out,or is there something else that could be wrong.


Offline Pete-zza

  • Lifetime Member
  • Global Moderator
  • *
  • Posts: 21679
  • Location: Texas
  • Always learning
Re: blodgett 1060 pilot adjustment
« Reply #1 on: June 10, 2010, 08:58:33 AM »
nicks pizza,.

In parallel with your post here, you might also want to register and post your question at the PMQ Think Tank at http://thinktank.pmq.com/viewforum.php?f=6&sid=0d10c6c452b7dfd7bf8a6f9f2e528c87. From time to time, I have read about problems like yours at the PMQTT.

Peter

Offline pcampbell

  • Supporting Member
  • *
  • Posts: 767
  • Age: 33
  • Location: VT & NJ
Re: blodgett 1060 pilot adjustment
« Reply #2 on: June 10, 2010, 09:31:37 PM »
there should be an adjustment screw on the pilot safety valve?

do you have a picture of it? 
Patrick

Offline nicks pizza

  • Registered User
  • Posts: 2
Re: blodgett 1060 pilot adjustment
« Reply #3 on: September 17, 2010, 03:34:04 PM »
i do not have a camera with me at work,is it the little screw behind the bigger srew if that makes any sense to you?meaning you would have to take one screw out to turn the other that is behind it.or could it be just the high and low settings for the burner?

buceriasdon

  • Guest
Re: blodgett 1060 pilot adjustment
« Reply #4 on: September 17, 2010, 04:27:17 PM »
http://www.retrevo.com/support/Blodgett-1060-Ovens-manual/id/21843ag616/t/2/

I didn't look myself, but here is a downloadable manual. I find problems with pilot lights as a rule are thermocouple problems.
Don

Offline crazycarlspies

  • Registered User
  • Posts: 4
  • Age: 41
  • Location: Pea Green Colorado
Re: blodgett 1060 pilot adjustment
« Reply #5 on: November 16, 2010, 07:16:51 PM »
if the flame keeps going out its a thermo coupler very easy to change


 

pizzapan