Author Topic: Help with my LBE design  (Read 1254 times)

0 Members and 1 Guest are viewing this topic.

Offline Pizza Brat

  • Registered User
  • Posts: 11
Help with my LBE design
« on: March 10, 2012, 07:15:01 PM »
I just posted a few days ago about wanting to build a LBE out of a square shaped BBQ. Right now I'm tearing it apart and have decided to lower the ceiling in the lid using a sheet of galvanized steel. The distance from the lid to the stone will be about 2 1/2 to 3 inches. I have an extra stone and am wondering if it's worth attaching to the lid or not. Should I fill the space above the lid with foil? Do I really need the upper lid vent? I'm using a 60,000 btu burner and there are also vent holes in the front and back of the base that sits 1 inch below the stone. The distance from the top of the burner to the bottom of the stone will be about 5 inches. Do I need a deflector? I have a slightly smaller stone I can sandwich with or would a piece of steel be better. Finally, is there any value in enclosing the base to reduce it's volume like I'm doing on the lid.

Thanks for any input.


buceriasdon

  • Guest
Re: Help with my LBE design
« Reply #1 on: March 10, 2012, 08:32:53 PM »
I'm all for reducing the air volume in the lid, but I really don't like the idea of using galvanized steel to do it.
Don