Author Topic: Tool set recommendation for newbie WFO owner  (Read 1604 times)

0 Members and 1 Guest are viewing this topic.

Offline ForrestM

  • Registered User
  • Posts: 44
Tool set recommendation for newbie WFO owner
« on: December 01, 2012, 11:47:39 AM »
Hey all,

Does anyone have any advice on a set of tools for a newbie to get for making pizza in a WFO?  Not necessarily the prep stuf, but things like paddles, ir thermometer, etc.

There seem to be a lot of choices in this area so any suggestions are appreciated.  I figure I will put them on the Christmas list and see if I can get lucky.

Thanks!


Offline Chaze215

  • Registered User
  • Posts: 729
  • Location: Jersey Shore
Re: Tool set recommendation for newbie WFO owner
« Reply #1 on: December 01, 2012, 02:25:51 PM »
My suggestion would be to contact John (JConk007). He is one of the nicest and most knowledgable folks on here regarding all things WFO. Just my 2 cents.
Chaz

Offline Chicago Bob

  • Lifetime Member
  • *
  • Posts: 10399
  • Location: North Carolina
  • Easy peazzy
Re: Tool set recommendation for newbie WFO owner
« Reply #2 on: December 01, 2012, 02:30:20 PM »
+1....'ol 007 is awesome.  8)
"Care Free Highway...let me slip away on you"

Offline ForrestM

  • Registered User
  • Posts: 44
Re: Tool set recommendation for newbie WFO owner
« Reply #3 on: December 01, 2012, 03:04:24 PM »
Thanks folks.  I will reach out to him.  Maybe he will be kind enough to answer here so that more than myself can benefit from his experience. 

Offline TXCraig1

  • Registered User
  • Posts: 12670
  • Location: Houston, TX
Re: Tool set recommendation for newbie WFO owner
« Reply #4 on: December 01, 2012, 08:24:04 PM »
Thanks folks.  I will reach out to him.  Maybe he will be kind enough to answer here so that more than myself can benefit from his experience. 


Here you go. These are the four must haves:

http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=11&Itemid=214&lang=en
http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=157&Itemid=214&lang=en
http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=81&Itemid=214&lang=en
http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=116&Itemid=214&lang=en

Unless you have a very small or very large oven, I would suggest 47" handle on the loading peel and 59" on the turning peel and shovel.

Craig
Pizza is not bread.

Offline JConk007

  • Vendor
  • *
  • Posts: 3668
  • Location: New Jersey
  • Lovin my Oven!
    • Flirting with Fire
Re: Tool set recommendation for newbie WFO owner
« Reply #5 on: December 01, 2012, 09:01:30 PM »
Exactly as I sent you in the PM! great minds think alike!  47" on the launch peel 59 on the turning peel 8 or 9" head Perf or non perf those 2 are personal choices, Get the azzure professional line very nice stuff ! Glad to get you whatever you need.
Thanks !
john
I Love to Flirt with Fire! www.flirtingwithfirepizza.com

Offline Jet_deck

  • Supporting Member
  • *
  • Posts: 3041
  • Location: Between Houston and Mexico
Re: Tool set recommendation for newbie WFO owner
« Reply #6 on: December 01, 2012, 11:29:24 PM »
PM sent.
Her mind is Tiffany-twisted, she got the Mercedes bends

Offline ForrestM

  • Registered User
  • Posts: 44
Re: Tool set recommendation for newbie WFO owner
« Reply #7 on: December 02, 2012, 09:25:20 AM »
Thanks!

Offline PN.pizza

  • Registered User
  • Posts: 6
Re: Tool set recommendation for newbie WFO owner
« Reply #8 on: January 18, 2013, 07:24:47 PM »
Here you go. These are the four must haves:

http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=11&Itemid=214&lang=en
http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=157&Itemid=214&lang=en
http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=81&Itemid=214&lang=en
http://www.gimetalusa.com/index.php?option=com_virtuemart&page=shop.browse&category_id=116&Itemid=214&lang=en

Unless you have a very small or very large oven, I would suggest 47" handle on the loading peel and 59" on the turning peel and shovel.

Craig


The gimetalusa.com links above no longer work.  Any chance someone can post the names/sizes of the tools and/or revised links?

Thanks,
 -Paul


Offline JConk007

  • Vendor
  • *
  • Posts: 3668
  • Location: New Jersey
  • Lovin my Oven!
    • Flirting with Fire
Re: Tool set recommendation for newbie WFO owner
« Reply #9 on: January 19, 2013, 12:04:04 AM »
Just go to www.GIMetalusa.com I can hook you up I now have stock on most tool glad to help a member here  and will help with what you really need Depends on the size of your oven. But basics are
Ac/pl
A32rf/120
Ac/spt
1-23rf
1-20/120 extra for wood moving and oven management
Thanks !
John
007
« Last Edit: January 19, 2013, 12:08:42 AM by JConk007 »
I Love to Flirt with Fire! www.flirtingwithfirepizza.com


 

pizzapan