Author Topic: oven over heating problem  (Read 2354 times)

0 Members and 1 Guest are viewing this topic.

Offline carnut

  • Registered User
  • Posts: 2
oven over heating problem
« on: October 30, 2011, 11:23:08 PM »
I have two blodgett 961 gas deck ovens mounted on a safety valves,thermostats.,gas valves,pilot burners,thermocouples and regulators.they light good but after about 40 min.they shut down until they cool alittle (about 20 min).you then can relight and the same thing happens again.I saw on jerry's talk (etundra) about the thermocouple tubes overheating and they should work after being wrapped w/high temp insulation.I double wrapped them but still have the same problem.Any buddy ever have the same problem if so how did you fix it.any help would be great.Thanks !

Offline Jet_deck

  • Registered User
  • Posts: 3062
  • Location: Corpus Christi, Texas
Re: oven over heating problem
« Reply #1 on: October 31, 2011, 12:05:21 AM »
Can you share a link for a picture of the two Blodgett ovens on the trailer?  Thanks in advance.
« Last Edit: October 31, 2011, 12:12:32 AM by Jet_deck »
Her mind is Tiffany-twisted, she got the Mercedes bends

Offline asg74

  • Registered User
  • Posts: 2
  • Location: United States
  • I Love Pizza!
Re: oven over heating problem
« Reply #2 on: May 16, 2015, 02:51:14 AM »
I know this is an old topic but I have the same issue. I can't believe I can't find a solution on the internet anywhere.....

Anyone have an idea ???

Offline vtsteve

  • Supporting Member
  • *
  • Posts: 796
  • Location: Vermont, USA
Re: oven over heating problem
« Reply #3 on: May 16, 2015, 12:11:10 PM »
When the pilot goes out, can you measure the temperature where the TC tube screws into the valve body? What parts have you already swapped out?
In grams we trust.